Operating Modes - Raymarine DSM250 Owner's Handbook Manual

Chapter 1: Overview

Operating Modes

Depending on the types of display(s) you have connected via
up to four full-screen modes – sonar, chart, radar, and data log are
available. You select the operating mode using the DISPLAY key
as described in Chapter 3.
You can also set Windows On to split the display into two half-
screen windows (horizontal or vertical) to show supplementary
data, or to display sonar and chart or radar simultaneously.
Horizontal Half -Screen Window Options
Using horizontal half screens, the main operating mode is dis-
played in the upper window; you choose what is displayed in the
lower window. The following information, if available on your
system, can be shown:
Table 1-1: Horizontal Half-Screen Window Options
Full-screen
mode Horizontal Half-Screen Window Options
Sonar Mode Course Deviation Indicator (CDI), Bearing and Distance
Indicator (BDI), Depth/Temp graph, Chart plotter, Radar
Chart Mode CDI, BDI, Navigation Data (databoxes), Radar, Sonar
Radar Mode CDI, BDI, Navigation Data, Chartplotter, Sonar
Data Log Mode Half-screens not available
Vertical Half -Screen Window Options
This option splits the sounder vertically. The left hand window dis-
plays data boxes; there are three different sets of data (A, B, and C)
that you can select for display. The following information is avail-
able only in Sonar Mode:
Table 1-2: Vertical Half-Screen Window Options
Full-screen
mode Vertical Half-Screen Window Options
A Temperature, Speed, Depth
B Position (latitude and longitude), Course Over Ground
(COG), Speed Over Ground (SOG), Depth
C Waypoint Range and Bearing, COG, SOG, Depth
1-7
,
hsb
2