Sonar Set Up Parameters - Raymarine DSM250 Owner's Handbook Manual

Chapter 4: System Setup

4.4 Sonar Set Up Parameters

SONAR
SET UP¬
• Radar provides simulated radar picture, with example targets.
The picture does not change if you change the range, although
the range rings are adjusted (see radar documentation).
• Both provides simulated data and radar picture.
When the simulator is switched on, a SIMULATOR data box is dis-
played during operation, showing the simulation selected.
Sonar simulator mode is set in the Sonar setup menu, described in
Section 4.4.
The SONAR SET UP option enables you to set up the sounder
according to your system configuration and your personal prefer-
ences.
The following table lists the Sonar Set Up parameters and their
options, shows the factory default setting, and provides a space
for you to make a note of your new setting. Each parameter is
described in the following subsections.
Table 4-3: Sonar Mode Set Up Parameters
Parameter
TARGET DEPTH ID
COLOR BAR
DEPTH DIGIT SIZE
SONAR HSB MODE
DEPTH OFFSET
SPEED CALIBRATE
TEMP CALIBRATE
SONAR HISTORY
SONAR INT REJ
SONAR SIMULATOR
Options
OFF
ON
OFF
ON
LARGE
SMALL
REPEATER
MASTER
Value
0% to 200%
-9.0 °F to +9.0 °F
LARGE or SMALL
AUTO, LOW or HIGH
OFF
ON
Factory
Default New Setting
OFF
ON
LARGE
MASTER
0.0
100%
0°F
LARGE
AUTO
OFF
4-13