Johnson Controls F4-CV Series Installation Manual page 19

Accessories
The following table provides the product code number and description for the CV series accessories.
Table 12: CV series controller accessories (order separately)
Product code number
XPM Series Expansion Modules
FX-PCX Series Expansion Input/Output Modules
FX-FCP-0
Mobile Access Portal (MAP) Gateway
FX-DIS1710-0
NS-ATV7003-0
NS Series Network Sensors
AS-CBLTSTAT-0
NS-WALLPLATE-0
WRZ Series Wireless Room Sensors
WRZ-7860-0
WRZ-SST-120
WRG1830/ZFR183x Pro Wireless Field Bus System
Y64T15-0
Y65A13-0
Y65T31-0
Y65T42-0
ACC-TBKPWFCSA-0
ACC-TBKINOUT-0
Description
Refer to the Facility Explorer CGx, CVx Equipment Controllers and XPM Expansion
Modules Product Bulletin (LIT-12013225) for a complete list of available XPM series
expansion modules.
Refer to the FX-PC Series Programmable Controllers and Related Products Product
Bulletin (LIT-12011657) for a complete list of available FX-PCX Expansion I/O
Modules.
License enabling Facility Explorer Equipment Controller Firmware Package Files
required for CCT
Refer to the Mobile Access Portal Gateway Catalog Page (LIT-1900869) to identify the
appropriate product for your region.
Local Controller Display
Handheld VAV Balancing Tool
Refer to the NS Series Network Sensors Product Bulletin (LIT-12011574) for specific
sensor model descriptions.
Cable adapter for connection to 8-pin TE-6700 Series sensors
Network Sensor Wall Plate
Refer to the WRZ Series Wireless Room Sensors Product Bulletin (LIT-12000653) for
specific sensor model descriptions.
Refer to the WRZ-7860 Receiver for One-to-One Wireless Room Sensing Product
Bulletin (LIT-12011640) for a list of available products.
Wireless System Survey Tool (for use with the lower power 10mW WRZ and
WRZ-7860 systems)
Refer to the WRZ-SST-120 Wireless Sensing System Tool Installation Instructions
(LIT-24-10563-55) for usage instructions.
This system is used for installations that support BACnet/IP but can also coexist
with the ZFR1800 Series when installed under the same supervisor such as a
network engine.
Refer to the WRG1830/ZFR183x Pro Series Wireless Field Bus System Catalog Page
(LIT-1901026) for a list of available products.
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 92 VA, Foot Mount,
72.2 cm (30 in.), Primary Leads and 76.2 cm (30 in.) Secondary Leads, Class 2
Transformer, 120 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount (Y65AS),
20.32 cm (8 in.), Primary Leads and 76.2 cm (30 in.) Secondary Leads, Class 2
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount
(Y65AR+), 20.32 cm (8 in.), Primary Leads and Secondary Screw Terminals, Class 2
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Hub Mount
(Y65SP+), 20.32 cm (8 in.), Primary Leads and Secondary Screw Terminals, Class 2
Power, FC Bus, and SA Bus terminal block replacement kit for SNC, CGM, CGE,
CVM, CVE, and XPM products. Kit includes 5 of each terminal block type. 15
terminal blocks in total.
Input and Output terminal block replacement kit for SNC, CGM, CGE, CVM, CVE,
and XPM products. Kit includes 5 of each 2, 3, and 4 position Input and Output
terminal blocks. 30 terminal blocks in total.
F4-CV Series VAV Terminal Equipment Controllers Installation Guide 19