Step 2 - Mount The Torque Bracket - Raymarine SportPilot User Manual

42
Step 2 – Mount the torque bracket
1.
.
2. Temporarily assemble the front of the torque restraint to the back
3. Fit, but do NOT tighten, the washer and bolt to hold the front and
Note: The torque restraint will not operate properly if the front and
back are not assembled correctly. Therefore, once you have
assembled the component parts, close the torque restraint as far as it
will go. If you have assembled it correctly, the front will lay flat
against the back.
SportPilot and SportPilot Plus - Owner's Handbook
3
/ inch (19 mm) steering shafts only: assemble the supplied
4
adaptor collar (5) to the shaft. Align the slot in the collar with the
slot in the steering shaft.
Adaptor collar
of the torque restraint.
back of the torque restraint together.
Torque restraint
(front)
Woodruff key
Torque restraint Washer
(back)
D1364-3
Bolt
D1525-2