Compatible Transducers For Fishfinder Variant Axiom™ Mfds; Realvision™ 3D Transom Mount Transducer - Raymarine axiom 7 Installation Instructions Manual

2.3 Compatible transducers for Fishfinder variant Axiom™ MFDs
Depending on your MFD variant you can connect the following transducer types directly to your MFD:
• RealVision™ 3D transducers
• DownVision™ transducers
• CHIRP conical beam transducers that utilize the 9 pin DownVision™ connector.
• Non-CHIRP transducer can be connected using available adaptor cables. Refer to the Raymarine®
website for compatible transducers: www.raymarine.com/transducers.
RV–100 RealVision™ 3D Transom Mount Transducer
Part number Description
A80464 RV-100 RealVision™ 3D Transom Mount Transducer
• The RV-100 is a RealVision™ 3D transducer, capable of producing 3D sonar images.
• The transducer can be connected to RealVision™ 3D variant MFDs running LightHouse™ 3 software.
Note: Additional mounting options are available for the RV-100 RealVision™ 3D transducer. These
include:
• Part number A80479: RealVision™ 3D Transducer Step Mount
• Part number A80480: RealVision™ 3D Transducer Jack Plate Mount
• Part number A80482: RealVision™ 3D Transducer Jack Plate Spacer Kit
For further mounting information, refer to the documentation supplied with these products.
16
Construction
Plastic