Raymarine SportPilot User Manual page 49

44
Note: If your dashboard does not extend below the bottom of the
SportPilot, you will need to manufacture an extension (from a
suitable material) and permanently attach this to the dashboard to
accommodate the torque bracket and torque restraint. The following
illustration shows how to fit a dashboard extension correctly.
Dashboard extension
10. Draw around the torque bracket with a pencil.
11. Remove the SportPilot (and adaptor collar/woodruff key on
12. Remove the bolt from the torque restraint.
13. Remove the cable holder from the back of the SportPilot.
14. Apply the self-adhesive template (supplied) to the bulkhead,
SportPilot and SportPilot Plus - Owner's Handbook
3
/ inch tapers) from the steering shaft.
4
using the pencil outline as a guide.
D2581-3
D1365-2