Raymarine SportPilot User Manual page 41

36
9. Turn the steering from side to side. Make sure that the linkage is
Rotary rudder position sensor – cabling
1. Connect the linear rudder position sensor cable to the RUDDER
2. Route the cable to the SportPilot, taking into account the EMC
Note: You will plug the moulded connector into the RUDDER REF
socket when installing the SportPilot (see page 45).
SportPilot and SportPilot Plus - Owner's Handbook
free from obstructions at all rudder angles.
RUDDER REF cable
REF cable (color for color). Use the Scotchlock connectors and
crimp the connectors with a pair of pliers.
Note: Connect the cables close to the SportPilot so that the
connectors remain dry and free from strain.
installation guidelines (page 22).
Scotchlock
connector
Rotary rudder position sensor cable
D1543-2