Installing The Sportpilot; Step 1 - Remove The Steering Wheel - Raymarine SportPilot User Manual

Chapter 4: Installing the SportPilot

4.6 Installing the SportPilot

Step 1 – Remove the steering wheel
1. Turn the wheel all the way over to starboard lock. You
2. Remove the steering wheel hub.
3. Holding the steering wheel still, use a suitable socket or the
4. Carefully remove the steering wheel.
5. Remove the original woodruff key. Retain the woodruff key as
Steering
wheel hub
137.5 mm (5.4 in)
238.5 mm (9.4 in)
MUST do this so you can tighten the retaining nut at the end of
installation (see page 48) without damaging the SportPilot.
supplied box spanner to remove the retaining nut and washer.
you will need to use it during a later stage of installation.
Retaining
Washer
nut
100.5 mm (4.0 in)
D1355-2
Woodruff
key
D1363-2
41