Chapter 4: Installing the SportPilot
5. Use the two stainless steel hose clamps/jubilee clips to secure the
View from above
6. Cut the connecting rod to length.
7. Screw the lock-nuts and sockets onto the connecting rod.
8. Press the sockets onto the sensor pin and steering pin.
min: 75 mm (3 in) to max: 310 mm (12.2 in)
steering pin to the tie-bar.
Steering pin
Hose clamps/Jubilee clips
Steering pin Lock nut
Socket
Tie-bar
Drive aperture
Tie-bar
Connecting rod
35
Tie-bar
D1674-2