Connecting Seatalk Equipment - Raymarine SportPilot User Manual

Chapter 4: Installing the SportPilot

4.5 Connecting SeaTalk equipment

You can use the SportPilot's dedicated SeaTalk port to connect it to
SeaTalk instruments or autopilot control units. The SportPilot can
then share SeaTalk data with the instruments. It can also provide them
with power if required.
Raymarine produce a range of SeaTalk cables you can use to connect
the SportPilot to SeaTalk instruments:
•
•
flat moulded plugs are used on recent SeaTalk instruments
(e.g. ST30, ST40 and ST60)
round plugs are used on older SeaTalk instruments (e.g. ST50)
Extension cables - flat moulded plugs at each end
Part no. Type
D284 Flat moulded plugs at each end
D285 Flat moulded plugs at each end
D286 Flat moulded plugs at each end
D287 Flat moulded plugs at each end
D288 Flat moulded plugs at each end
Conversion cables - flat moulded plug to round plug
Part no. Type
D187 Flat moulded plug to male round plug
D188 Flat moulded plug to female round plug
Extension cables - round plugs at each end
Part no. Type
D124 Male round plug to female round plug
D125 Male round plug to female round plug
D126 Male round plug to female round plug
D154 Male round plug to female round plug
Interface cables - flat moulded/round plug to bare ends
Part no. Type
D229 Flat moulded plug to bare ends
D179 Male round plug to bare ends
D181 Female round plug to bare ends
39
Length
1 m (3 ft 3 in)
3 m (9 ft 10 in)
5 m (16 ft 5 in)
9 m (29 ft 6 in)
20 m (65 ft 6 in)
Length
0.15 m (6 in)
0.3 m (12 in)
Length
1 m (3 ft 3 in)
3 m (9 ft 10 in)
6 m (19 ft 8 in)
9 m (29 ft 6 in)
Length
1 m (3 ft 3 in)
3 m (9 ft 10 in)
3 m (9 ft 10 in)
D5554-1