Configuring And Confirming Settings For Each Lane - Panasonic WX-CC411BP Operating Instructions Manual

Browser Operation
w Configuring and confirming
w
settings for each lane
This tab is used to configure and confirm settings for each
lane.
To display this screen, click the [Lane] button in the Setup
menu panel.
To configure and confirm settings for Lane B, click the
[Lane B] tab. (WX-CC412BP only)
[Input volume (0-20)]
Displays the input volume for each All-In-One Headset
and Belt Pack and the order post speaker. The volume
range is from 0 to 20. This setting can be changed through
operations on the Center Module.
Outside mic: Displays the volume of the order post
microphone.
AUX mic: Displays the volume of the kitchen microphone.
Line in: Displays the volume of the line input.
Beep: Displays the volume of the beep tone.
[Output volume (0-20)]
Displays each output volume. The volume range is from 0 to
20. This setting can be changed through operations on the
Center Module.
Outside speaker: Displays the volume of the order post
speaker.
AUX speaker: Displays the volume of the kitchen
speaker.
Line out: Displays the volume of the line output.
[AUX speaker (0-20)]
Set the input sound source file and the volume of the file
to be output to the kitchen speaker. This setting can be
changed through operations on the Center Module.
Outside mic ON/OFF
Volume
Headsets TALK
PAGE
Volume
AUX mic (ON/OFF)
Beep ON/OFF
Volume
[Device for Line in]
Set the output destination for line input. Line input will be
output to all All-In-One Headsets or Belt Packs and the
kitchen speaker.
[Source for Line out]
Set the input sound file source for line output. The output
destination for the line sound source file will be the same
as that of the sound source file output from the order post
speaker.
21
Set whether to output the voice of the
order post microphone to the kitchen
speaker.
Displays the volume of the order post
microphone output to the kitchen speaker.
Set whether to output the "TALK" voice
from the All-In-One Headsets or Belt
Packs to the kitchen speaker.
Set whether to output the "PAGE" voice
from the All-In-One Headsets or Belt
Packs to the kitchen speaker.
Displays the volume of the voice from
the All-In-One Headsets or Belt Packs to
be output to the kitchen speaker.
Set whether to output the voice of the
kitchen microphone to the kitchen
speaker.
Set whether to output the beep tone to
the kitchen speaker.
Displays the volume of the beep tone
output to the kitchen speaker.