Panasonic WX-CC411BP Operating Instructions Manual page 23

Browser Operation
Message list
Configure the settings for each greeter message. This
setting can also be changed through operations on the
Center Module.
[No.]
Displays the number of the greeter message.
[Message name]
Set the name of the greeter message.
[Upload] button
This button is used to upload a sound source file to replace
the sound source file that is currently being used as the
greeter message.
[Download] button
This button is used to download the sound source file being
used as the greeter message from the Center Module. The
button is disabled when there is no sound source file.
Important
w p Sound source files are in the following format. Use
compatible software when playing or editing files
using a PC.
Format: ADPCM (G.726)
Sampling frequency: 8 kHz
Quantization bit rate: 4 bit
Sound source files that can be uploaded must be in
the above format and no longer than 20 seconds.
w p Sound source files cannot be uploaded or
downloaded if an SD card is not inserted.
q Configuring greeter message schedule
w
settings [Greeter schedule]
This tab is used to configure greeter message schedule
settings. Click the [Message] button, then the [Greeter
schedule] tab.
[Days of the week]
The schedule for the selected day of the week is displayed.
The schedule displays the start time for playing the greeter
message and the message that will be played.
Schedule list
Configure the settings for each greeter schedule. This
setting can also be changed through operations on the
Center Module.
[No.]
Displays the number of the schedule.
[Start time]
Set the start time of the greeter message.
[Message]
Set the message number and name of the greeter message
that will start.
23