Panasonic WX-CC411BP Operating Instructions Manual page 32

Browser Operation
q Retrieving TALK & PAGE Recording sound
w
source files [Recorded data]
This tab displays sound source files from TALK & PAGE
Recording that were recorded during a security alert by
holding down button F of an All-In-One Headset or Belt
Pack. Click the [Maintenance] button, then the [Recorded
data] tab.
Note
w p There is no button F on WX-CH455 and WX-CH457P.
Refer to "Alert notification" in the WX-CH455/
WX-CH457P Operating Instructions for how to send
security alerts from WX-CH455/WX-CH457P to the
Center Module.
[Delete] checkbox
Selects the checkboxes of all TALK & PAGE Recording
sound source files. Delete the sound source files that are
selected by clicking the [Delete] button.
[File] column
Displays the filename of the sound source file.
[Lane] column
Displays the lane for TALK & PAGE Recording.
[Download] button
This button is used to download a TALK & PAGE Recording
file from the Center Module.
[Delete] button
This button is used to delete sound source files with
checkboxes selected.
Important
w p Sound source files are in the following format. Use
compatible software when playing or editing files
using a PC.
Format: ADPCM (G.726)
Sampling frequency: 8 kHz
Quantization bit rate: 4 bit
Sound source files that can be uploaded must be in
the above format and no longer than 20 seconds.
w p Sound source files cannot be downloaded if an SD
card is not inserted.
q Retrieving log data [Log]
w
This tab is used to download the operational log of the
Center Module. Click the [Maintenance] button, then the
[Log] tab.
[Download] button
This button is used to download the log file.
Important
w p Note that Panasonic cannot respond to inquiries
about log data.
32