Panasonic WX-CC411BP Operating Instructions Manual page 26

Browser Operation
q Configuring and confirming alert message
w
settings [Alert message]
This tab is used to configure and confirm settings of the
alert message to be played during a security alert. Click the
[Message] button, then the [Alert message] tab.
[ON/OFF]
Set whether to use alert message. This setting can also be
changed through operations on the Center Module.
OFF: The alert message is not played back.
ON: The alert message is played back.
[Volume (0 - 20)]
Displays the volume of the alert message. The volume
range is from 0 to 20. This setting can be changed through
operations on the Center Module.
[Delay time (0 - 10s)]
Set the delay time after the occurrence of an alert until the
alert message is played back. The range is 0 to 10 seconds.
Message list
Configure the settings for each alert message. This setting
can also be changed through operations on the Center
Module.
[No.]
Displays the number of the alert message.
[Message name]
Set the name of the alert message.
[Destination]
w p Group
Set the broadcast destination group for the alert
message.
All headsets:
Group number: The alert message is broadcast to the
w p AUX
Set whether to output the alert message to the kitchen
speaker.
OFF: The alert message is not output to the kitchen
speaker.
ON: The alert message is output to the kitchen speaker.
[Upload] button
This button is used to upload a sound source file to replace
the sound source file that is currently being used as the alert
message.
[Download] button
This button is used to download the sound source file being
used as the alert message from the Center Module. The
button is disabled when there is no sound source file.
Important
w p Sound source files are in the following format. Use
compatible software when playing or editing files
using a PC.
Format: ADPCM (G.726)
Sampling frequency: 8 kHz
Quantization bit rate: 4 bit
Sound source files that can be uploaded must be in
the above format and no longer than 20 seconds.
w p Sound source files cannot be uploaded or
downloaded if an SD card is not inserted.
26
The alert message is broadcast to all All-
In-One Headsets or Belt Packs.
All-In-One Headsets or Belt Packs in the
selected group(s).