Panasonic WX-CC411BP Operating Instructions Manual page 16

Browser Operation
Configuring Help contact email transmission
settings
This area is used to configure the email to be sent from the
LCD display Help contact screen.
[Destination E-mail address]
Set the destination email addresses. The same message
can be sent to up to 5 email addresses.
Number of characters: 3 to 128
Types of characters: alphanumeric, characters @ . _ -
[E-mail subject]
Input the subject of the email.
Number of characters: 0 to 50
[E-mail body]
Input the body of the email.
Number of characters: 0 to 200
Note
w p The SMTP server must be set before an email can be
sent. To set the SMTP server, click the [Installation]
button, then the [Server] tab.
w p The following substitute characters can be used in the
email body. The substitute characters will be replaced
with the corresponding character string when the
email is sent.
Substitute
Character string after substitution
characters
%d% Help contact email sent date
e.g. 05
%M% Help contact email sent month (alphabetical
character)
e.g. Feb
%m% Help contact email sent month (numerical
character)
e.g. 02
%Y% Help contact email sent year (four-digit)
e.g. 2014
%y% Help contact email sent year (the last two digits)
e.g. 14
%t% Help contact email sent time
e.g. 15:00:00
%i% IP address of the Center Module
%s% Information entered in Site information
Important
w p When using the Help contact email function, confirm
that emails can be sent correctly in advance when the
unit is installed.
q Configuring screen settings [Screen]
w
Configure the screen saver settings and language settings
for the Center Module, and display the "Touch Panel
Adjustment" screen. This setting can also be changed
through operations on the Center Module.
To display this screen, click the [Installation] button, then the
[Screen] tab.
[Screen saver]
OFF: Do not use the screen saver function.
ON: Use the screen saver function.
[Language]
Configure the language to be displayed on the LCD display
of the Center Module. Select the language and then click the
[Set] button. Select a language from the following.
English: Texts are displayed on the LCD display in English.
Français: Texts are displayed on the LCD display in French.
Español: Texts are displayed on the LCD display in Spanish.
Note
w p The display language for the LCD display of the
Center Module is reflected after setting when the
screen changes.
[Touch Panel Adjustment]
Displays the Center Module Touch Panel Adjustment screen.
Use this function in the situation where you cannot transition
to the "Touch Panel Adjustment" screen because there is no
response when you touch the buttons on the LCD display.
After touching
touch panel of the Center Module to display the "Setting
Information" screen, click the [Execute] button in the
browser.
Note
w p For information about touch panel adjustment, refer to
the Operating Instructions <Setup Instructions> (PDF
file).
w p After touch panel adjustment, the Center Module
returns to the "Setting Information" screen.
w p If you cannot complete touch panel adjustment,
contact the store where you purchased this unit.
16
(Setting Information button) on the