Panasonic WX-CC411BP Operating Instructions Manual page 17

Browser Operation
q Setting Site information [Site info.]
w
This tab is used to input information particular to the store
in which the unit is installed, such as the contact number for
the store and management information. This information is
used when viewing store information from a browser. This
information can only be set and viewed with a browser.
Click the [Installation] button, then the [Site info.] tab.
Number of characters: 0 to 200
q Display the next screen [Next]
w
This button moves you to the screens where you can
confirm audio quality settings, order post microphone
settings, and terminal settings.
q Confirming the audio quality settings
w
[Sound Band]
Confirm the audio settings for the Center Module. This
setting can be changed through operations on the Center
Module.
To display this screen, click the [Installation] button, then the
[Sound Band] tab.
スクリーンショット画像
2校で提出
Wideband: Audio range is set to 100 Hz to 7 kHz. (high
audio quality)
Narrowband: Audio range is set to 300 Hz to 3 kHz. (normal
audio quality)
q Confirming order post microphone settings
w
[Outside Mic]
Confirm the settings for the microphone used on the order
post. This setting can be changed through operations on the
Center Module.
To display this screen, click the [Installation] button, then the
[Outside Mic] tab.
スクリーンショット画像
2校で提出
Electret Microphone: Using WX-CM470P.
Microphone/Speaker: Using WX-CS560.
17