Troubleshooting - Rangemaster 110 Gas User Manual

Troubleshooting

Hotplate ignition or hotplate
burners faulty
Is the power on? Is the clock illuminated? If not
there maybe something wrong with the power
supply.
See 'power supply' section further on.
Are the sparker (ignition electrode) or burner
slots blocked by debris?
Is the burner trim correctly located?
Are the burner caps correctly located?
See the section entitled 'Cleaning your cooker'
Hotplate burners will not light
If only one or all the hotplate burners will not
light, make sure that the parts have been
replaced correctly after wiping or removing for
cleaning.
Check that there is not a problem with your gas
supply. You can do this by making sure that other
gas appliances you may have are working.
Do the burners spark when you push the
button? If not check the power is on - is the clock
illuminated?
A crack has appeared in the
Warmer plate's surface
Disconnect the cooker immediately from the
power supply and arrange for its repair. Don't
use the cooker until after the repair. See the
HELP leafl et for how to contact a service person.
The knobs get hot when I use the
oven or the grill, can I avoid this?
Yes, this is caused by heat rising from the oven
or the grill, and heating them up. Don't leave
the oven door open. Make sure that the grill pan
is pushed right back to the 'back stop' when
grilling.
Grill Ignition faulty
Is the power on? Is the clock illuminated? If not
there maybe something wrong with the power
supply. See 'power supply' section further on.
Grill not cooking properly
Are you using the pan and trivet supplied with
the cooker? Is the pan being used on the
runners, not the fl oor of the compartment? Is the
grill tray pushed fully back to stop?
Oven ignition faulty
Is the power on? Is the clock running? - if not
there may be something wrong with the power
supply.
See the section on 'Checking the power supply'.
Check that the electrode and burner slots are
not blocked by debris.
Has the Timer been set to auto by mistake, or
after power cut?
Has the Timer been set correctly but oven tap
not left OFF by mistake?
Is the key symbol ( ) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of the
clock.
Oven not coming on when turned
on manually
Is the power on? Is the clock illuminated? If not
there may be something wrong with the power
supply. Is the cooker supply on at the isolator
switch? Is the clock fl ashing 0.00? If so set it to
the correct time of day. Has the Timer been set
to AUTO by mistake. If AUTO is showing on the
clock display, press the 'cook period' button and
reduce any set cooking time showing to 0.00,
with the (+) and (-) buttons. Press the
twice.
Is the key symbol ( ) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of the
clock.
Oven not coming on when
automatic cooking
Timer set correctly but oven knob left OFF by
mistake?
Is the key symbol ( ) showing in the display?
See the Clock section of the instructions for
more information on the key lock feature of the
clock.
18
button