Internal Parameters And Routines Reference - Metrologic M20-EPS User Manual

7. Internal parameters and routines reference

The following list show all available internal parameters and routine, including access
path with the menu structure and a brief description.
Procedure: Erase all acquired data
Functional description: Data collector system
Menu access path:
Description: Erases all stored samples from the internal flash memory. See section 5.
Data logger.
Procedure: Needle calibration
Functional description: Product parameter (needle calibration)
Menu access path:
(or key
Description: Access needle calibration and zero reference routine.
Parameter: Display Contents
Functional description: Product parameters (LCD option)
Factory default value: Show instantaneous readout, average and standard deviation
Menu access path:
options
Description: Allow setup of displays contents at LCD.
Procedure: Copy setup between setup/products
Functional description: Utilities
Menu access path:
Description: Allow copy of a specific setup from a product slot to another.
Parameter: Setup/Product description
Functional description: Product parameter (basic)
Default factory value: No description
Menu access path:
Description: User can define a small text description to easily identify a configured
setup/product and allow fast setup/product search on multi setup scenarios.
Metrolog Controles de Medição Ltda
(2s) Erase all acquired data

Product parameters

during measurement)
Product parameters

Display contents

Utilities

Product parameters

Product n

Product n

Copy config from/to

Product n

Needle calibration

LCD display

Description

43