Table of Contents
Advertisement
Using native equipment interface:
Press key
•
Use key
•
Press key
•
group should be transmitted. Use key
or select option All products to transmit all available data;
Press
•
A brief message will be displayed at transmission completion.
•
External request (USB or RS232 interface)
It is possible to request data transmission from data logger without user intervention.
This routine can be triggered by sending a specific command to the equipment. See
section 4.1.3 – M20 Communication protocol for details.
Note: During data transmission, if required, use key
Metrolog Controles de Medição Ltda
for 2 seconds;
or
, and go to submenu Transmit acquired data;
to access this routine. User should selected what setup/product
to start transmission.
or
to select a specific setup/product
to abort the process.
39
Advertisement
Table of Contents
