Recording Live Video; Video Security App; Show Latest Event; Audio Communication - Bosch NDP-5523-Z30L User Manual

Table of Contents

Advertisement

70
en | Operation via the browser
12.1.11

Recording live video

Video sequences from the displayed live video stream can be saved locally on the computer's
hard drive. The sequences are recorded at the resolution specified in the encoder
configuration. The storage location depends on the configuration of the camera.
1.
2.
12.1.12

Video Security App

Start Video Security app
To start the Video Security app, click
12.1.13

Show latest event

Click the Show latest event icon
The Playback page opens.
12.1.14

Audio communication

Audio can be sent and received via the Live page if the unit and the computer support audio.
1.
2.
All connected users receive audio signals sent from the unit but only the user who first
pressed the F12 key can send audio signals; others must wait for the first user to release the
key.
12.1.15

Storage, CPU and network status

When you access the unit with a browser, the icons in the list that follows are at the top right
corner of the window:
The information from the icons can help with solving problems with the unit or with fine-
tuning the unit.
Hover over the CPU load icon
VCA settings.
Hover over the Network load icon to see the network load. If the network load is too high,
change the encoder profile to reduce the bitrate.
12.1.16

Status icons

Various overlays in the video image provide important status information. The overlays provide
the following information:
The frame might show artifacts due to decoding errors.
2023-01 | 1.2 |
Click the recording icon
Saving begins immediately. The red dot on the icon indicates that a recording is in
progress.
Click the recording icon again to stop recording.
Press and hold the F12 key on the keyboard to send an audio signal to the unit.
Release the key to stop sending audio.
CPU load icon
Network load icon
Decoding error
to record video sequences.
.
to watch the last recorded important event.
to see the CPU load. If the CPU load is too high, change the
User Manual
AUTODOME IP starlight 5100i IR
Bosch Security Systems

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autodome ip starlight 5100i ir

Table of Contents