Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch AUTODOME IP starlight 5100i
Summary of Contents for Bosch AUTODOME IP starlight 5100i
- Page 1 AUTODOME IP starlight 5100i (In‑ceiling) Installation Manual...
-
Page 3: Table Of Contents
AUTODOME IP starlight 5100i (In-ceiling) Table of contents | en Table of contents Safety About this manual Legal information Safety precautions Important safety instructions Connection in applications Important notices Customer support and service Introduction Establishing the connection Configuration with Project Assistant app... -
Page 4: Safety
Legal information Copyright This manual is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. -
Page 5: Important Safety Instructions
Electrical Code (NEC)), Canadian Electrical Code, Part I (also called CE Code or CSA C22.1), and all applicable local codes. Bosch Security Systems accepts no liability for any damages or losses caused by incorrect or improper installation. All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm, into the electrical installation of the building. -
Page 6: Connection In Applications
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. -
Page 7: Important Notices
AUTODOME IP starlight 5100i (In-ceiling) Safety | en Important notices Notice! This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: –... - Page 8 | Safety AUTODOME IP starlight 5100i (In-ceiling) For use in China: CHINA ROHS DISCLOSURE TABLE Moving cameras Hazardous substance table according to SJ/T 11364-2014 Cr 6+ PBDE (Pb) (Hg) (Cd) (Cr 6+) (PBB) (PBDE) Housing & enclosures PCBA with connectors...
-
Page 9: Customer Support And Service
AUTODOME IP starlight 5100i (In-ceiling) Safety | en Customer support and service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. USA and Canada Telephone: 800-289-0096, option 5 Fax: 800-366-1329 Email: repair@us.bosch.com... -
Page 10: Introduction
You can also use the Project Assistant app to complete the initial configuration of the camera. In order to use this device with the Project Assistant app by Bosch, you must download the app from the Bosch Download Store, from Google Play, or from the Apple Store. -
Page 11: Product Description
Product Description | en Product Description The AUTODOME IP starlight 5100i camera extends the camera range of the series to the next level. The camera has a 1/2-inch, 4MP sensor, which is specially tuned for applications that need surveillance in scenes with varying light levels. -
Page 12: Preparing Wiring
| Preparing Wiring AUTODOME IP starlight 5100i (In-ceiling) Preparing Wiring Prepare and install all wiring for 24 VAC, PoE+ (Cat5e/Cat6), alarms, and audio as necessary. For 24 VAC, follow the recommendations for maximum cable distance and wire gage. Maximum cable distance in meters (feet) per minimum cable diameter The following table identifies the recommended transmission distance (maximum) in meters (feet), based on the specified wattage, per the minimum cable diameter (in mm²), when the... -
Page 13: Preparing The Camera
AUTODOME IP starlight 5100i (In-ceiling) Preparing the Camera | en Preparing the Camera Note: For pendant models, use T15. For in-ceiling models, use T10. Loosen the three (3) Hex screws in the trim ring / bubble enclosure with the appropriate Torx screwdriver. -
Page 14: Installing A Microsd Card (Optional)
| Installing a microSD card (optional) AUTODOME IP starlight 5100i (In-ceiling) Installing a microSD card (optional) Push the camera block until you see the card slot (item 1 in the following figure). Insert the card into the slot (item 2 in the following figure). -
Page 15: Installing An In-Ceiling Camera In A Suspended Ceiling
AUTODOME IP starlight 5100i (In-ceiling) Installing an In-ceiling Camera in a Suspended Ceiling | en Installing an In-ceiling Camera in a Suspended Ceiling Tools Required – Appropriate screwdriver (Phillips head) – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) Installation Requirements –... -
Page 16: Securing The Camera To The Ceiling
| Installing an In-ceiling Camera in a Suspended Ceiling AUTODOME IP starlight 5100i (In-ceiling) Securing the Camera to the Ceiling Connect the cables from the ceiling to the cables on the camera. Refer to the chapter Connection for more information. -
Page 17: Installing An In-Ceiling Camera In A Drywall Ceiling
AUTODOME IP starlight 5100i (In-ceiling) Installing an In-Ceiling Camera in a Drywall Ceiling | en Installing an In-Ceiling Camera in a Drywall Ceiling Tools Required – Appropriate screwdriver (Phillips head) – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) Installation Requirements –... -
Page 18: Securing The Camera To The Ceiling
| Installing an In-Ceiling Camera in a Drywall Ceiling AUTODOME IP starlight 5100i (In-ceiling) Securing the Camera to the Ceiling Connect the cables from the ceiling to the cables on the camera. Refer to the chapter Connection for more information. -
Page 19: Connection
AUTODOME IP starlight 5100i (In-ceiling) Connection | en Connection Caution! Compliance with EN50130-4 Alarm Standard – CCTV for Security Applications To meet the requirements of the EN50130-4 Alarm Standard, an ancillary uninterruptable power (UPS) supply is necessary. The UPS must have a Transfer Time between 2–6 ms and a Backup Runtime of greater than 5 seconds for the power level as specified on the product datasheet. - Page 20 | Connection AUTODOME IP starlight 5100i (In-ceiling) Label ID Description Cable Wire Color ALARM_IN1 Alarm In 1 White ALARM_IN2 Alarm In 2 Blue AUDIO OUT Audio Out Grey Ground Black AUDIO GND Audio Ground Green AUDIO IN Audio In Purple 2020-10 | 0.1 |...
-
Page 21: Troubleshooting
Transmission mode is set to UDP. Camera reboots frequently or Test your camera with another power supply. intermittently. Check the Bosch website for a software update that might address the issue. No OSD messages appear. Bosch’s Video SDK is required. Video management software from third parties does not use the SDK. - Page 22 | Troubleshooting AUTODOME IP starlight 5100i (In-ceiling) Problem Questions to Ask/Actions to Resolve the Problem If O.K., then: - Check that the Auto Iris Level is set to the appropriate level. If O.K., then: Ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft) or less.
-
Page 23: Technical Data
AUTODOME IP starlight 5100i (In-ceiling) Technical data | en Technical data For product specifications, see the datasheet for your camera, available on the appropriate product pages of the Online Product Catalog at www.boschsecurity.com. Bosch Security Systems 2020-10 | 0.1 |... -
Page 24: Support
– Troubleshooting – Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2020-10 | 0.1 | Bosch Security Systems Installation Manual... - Page 25 AUTODOME IP starlight 5100i (In-ceiling) Support | Bosch Security Systems 2020-10 | 0.1 | Installation Manual...
- Page 26 | Support AUTODOME IP starlight 5100i (In-ceiling) 2020-10 | 0.1 | Bosch Security Systems Installation Manual...
- Page 28 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2020 202010062250...