Table of Contents
Advertisement
34
en | Camera
Zoom
Identifies the current zoom factor of the camera (1x, 2x, 4x, or 8x).
Averaging period
Select the appropriate averaging period as a means of stabilizing the long term bit rate.
6.7
Encoder Regions
User can configure encoding regions for every configured preset (preposition/scene), to
increase or decrease the encoding quality for selectable areas of the video image. These
regions give better control of the bit rate. Important parts of the scene (identified as objects
in the GUI) are encoded at high resolution and therefore have an enhanced encoding quality.
Less important parts (such as the sky and trees in the background, all identified as
backgrounds in the GUI) are encoded at lower quality and therefore have a decreased
encoding quality.
Eight encoder regions can be defined.
Eight encoder regions can be defined. To define encoder regions, follow these steps.
1.
2.
3.
4.
5.
6.
7.
8.
6.8
Privacy Masks
Global settings
Disable masks
Click the check box to hide all privacy masks.
Mask enlargement
Select this check box to enlarge all masks automatically while the camera is in motion.
Pattern
Select the color of the mask as it will appear in live video:
Black, Gray, White, or Custom Color.
2023-01 | 1.2 |
From the first drop-down box (the unlabeled Regions selection list), select one of the
eight available regions. (The drop-down box has the default option of Region 1 ).
Click the + box to add an area.
Use the mouse to define the area (shape) that the region covers and to position the area
(shape) in the preview of the video image.
–
Drag the center, corner points, or sides of the shaded area (shape).
–
Double-click a side to add additional points to the area (shape).
From the last drop-down box (the unlabeled Mode selection list), select the encoder
quality for the defined area. (The drop-down box has the default option of Default ).
For un important parts of the video image, select Background.
For important parts of the video image, select Object.
(The quality levels for Background and for Object are defined in the Advanced settings
section of the page Encoder Profile.)
For PTZ cameras: From the second drop-down box (the unlabeled Pre-positions/Scenes
selection list), select a Pre-position/Scene to which to add the region. (The drop-down
list is blank by default unless you have defined at least one scene, in which case the
default is Pre-position 1 or the custom name for the preposition ).
Note: If you have not yet defined any prepositions/scenes, refer to Pre-positions and
Tours.
If required, select another region and repeat the steps.
To remove a region, select the area and click the waste bin icon.
Click Set to apply the region settings.
User Manual
AUTODOME IP starlight 5100i IR
Bosch Security Systems
Advertisement
Table of Contents
