Table of Contents
Advertisement
22
en | Camera
Stamping size
Select the desired font size of the overlays on the OSD: Normal or Large.
Select Custom to enable the Font size (‰) field.
Font size
Enter a number for a custom size (percentage) of the font, from 1 to 1000.
Text color
Select the color for the alarm message to be displayed in.
Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Transparent background
Check this box to make transparent the stamp background on the image.
Display milliseconds
If necessary, you can display milliseconds. This information can be useful for recorded video
images; however, it does increase the processor's computing time.
Select Off if you do not need to display milliseconds.
This option is only available if Time stamping is enabled.
Note: The time stamp (with or without the display of Milliseconds) on the OSD is the
indication to camera operators that the camera is showing live video, that the image is not
frozen.
Alarm mode stamping
Select On to display a text message overlay in the image in the event of an alarm. It can be
displayed at a position of your choice that you can then specify using the Custom option. Or it
can be set to Off for no overlay information.
1.
2.
3.
Stamping size
Select the desired font size of the overlays on the OSD: Normal or Large.
Select Custom to enable the Font size (‰) field.
Font size
Enter a number for a custom size (percentage) of the font, from 1 to 1000.
Alarm message
Enter the message to be displayed in the image in the event of an alarm. The maximum text
length is 31 characters.
Text color
Select the color for the alarm message to be displayed in.
Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Transparent background
Check this box to make transparent the stamp background on the image.
2023-01 | 1.2 |
Select the desired option from the list.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired position.
User Manual
AUTODOME IP starlight 5100i IR
Bosch Security Systems
Advertisement
Table of Contents
