Table of Contents
Advertisement
18
en | Connectivity
5
Connectivity
5.1
Cloud Services
Remote Portal
Operation
The operation mode determines how the camera communicates with the Remote Portal.
–
–
Connectivity state
This field identifies any cloud-based services with which the camera communicates.
–
–
Partner services
App management Portal
Connectivity state
Stratocast
Registration code
This area displays the state of the Stratocast registration code.
Connectivity state
5.2
Accounts
Type
Select the account type.
Authentication
Click the button to authenticate the account.
Account name
Enter an account name to be shown as the target name.
Note: The fields that appear next depend on the option that you select in the field Type.
IP address
Enter the IP address of the server on which you wish to save the JPEG images.
Login
Enter the login ID for the server.
Password
Enter the password that gives you access to the server. To verify the password, click the
Check button to the right.
Path
Enter the exact path on which you wish to post the images on the server. To browse for the
correct path, click the Browse button to the right.
2023-01 | 1.2 |
Select On to poll the server constantly.
Select Off to block polling.
If you have registered the device on a cloud-based service such as Bosch Remote Portal,
then this field identifies this fact ("Connected").
Note: The button (Visit Remote Portal) to connect to the device with that service is
active.
If you have not registered the device, then the message, "Not available. When
'Operation' is set to 'Auto', 'Automatic IP assignment (DHCP)' must be active to
connect to the Remote Portal" appears.
Note: The button (Visit Remote Portal) to connect to the device with that service is not
active.
User Manual
AUTODOME IP starlight 5100i IR
Bosch Security Systems
Advertisement
Table of Contents
