Recording Status; Recording Live Video; Audio Communication; Storage, Cpu And Network Status - Bosch MIC IP ultra 7100i User Manual

64 en | Operation via the browser
10.1.6

Recording status

The hard drive icon
The icon lights up and displays a moving graphic to indicate a running recording. If no
recording is taking place, a static icon is displayed.
10.1.7

Recording live video

Video sequences from the displayed live video stream can be saved locally on the computer's
hard drive. The sequences are recorded at the resolution specified in the encoder
configuration. The storage location depends on the configuration of the camera.
1.
2.
10.1.8

Audio communication

Audio can be sent and received via the Live page if the unit and the computer support audio.
1.
2.
All connected users receive audio signals sent from the unit but only the user who first
pressed the F12 key can send audio signals; others must wait for the first user to release the
key.
10.1.9

Storage, CPU and network status

When you access the unit with a browser, the icons in the list that follows are at the top right
corner of the window:
–
–
The information from the icons can help with solving problems with the unit or with fine-
tuning the unit.
Hover over the CPU load icon
VCA settings.
Hover over the Network load icon to see the network load. If the network load is too high,
change the encoder profile to reduce the bitrate.
2020-11 | 1.4 |
below the live camera image changes during an automatic recording.
Click the recording icon
– Saving begins immediately. The red dot on the icon indicates that a recording is in
progress.
Click the recording icon again to stop recording.
Press and hold the F12 key on the keyboard to send an audio signal to the unit.
Release the key to stop sending audio.
CPU load icon
Network load icon
to record video sequences.
to see the CPU load. If the CPU load is too high, change the
User Manual
MIC IP ultra 7100i │ MIC IP starlight 7100i
Bosch Security Systems