Connectivity; Cloud Services; Accounts - Bosch MIC inteox 7100i User Manual

16 en | Connectivity
5

Connectivity

5.1

Cloud Services

Remote Portal
Operation
The operation mode determines how the camera communicates with the Remote Portal.
–
–
Connectivity state
This field identifies any cloud-based services with which the camera communicates.
–
–
Partner services
Registration code
This area displays the state of the Stratocast registration code.
Connectivity state
This field indicates the device's connectivity state with Remote Portal.
–
Note: The Visit Remote Portal button will become active.
–
Note: The Register button will become active only if you have not registered the device to the
Remote Portal.
5.2

Accounts

Four separate accounts can be defined for posting and recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time settings of the device have been
correctly synchronized.
Authentication
Click the button to authenticate the account.
Account name
Enter an account name to be shown as the target name.
Note: The fields that appear next depend on the option that you select in the field Type.
IP address
Enter the IP address of the server on which you wish to save the JPEG images.
Login
Enter the login ID for the server.
2022-01 | 1.13 |
Select On to poll the server constantly.
Select Off to block polling.
If you have registered the device on a cloud-based service such as Bosch Remote Portal,
then this field identifies this fact ("Connected").
Note: The button () to connect to the device with that service is active.
If you have not registered the device, then the message, "Not available. When
'Operation' is set to 'Auto', 'Automatic IP assignment (DHCP)' must be active to
connect to the Bosch Remote Portal" appears.
Note: The button () to connect to the device with that service is not active.
If the device is registered and the operation mode is set to On, the state will indicate that
the device is Connected (to the cloud service).
If the device is not registered or the operation mode is set to Off, the state will indicate
that the device is Not available.
User Manual
MIC inteox 7100i
Bosch Security Systems