Connectivity; Cloud Services; Accounts; Dyndns - Bosch AUTODOME IP starlight 5100i User Manual

AUTODOME IP starlight 5100i
6

Connectivity

6.1

Cloud Services

Bosch Remote Portal
Operation
The operation mode determines how the camera communicates with the Bosch Remote
Portal.
–
–
Connectivity state
This field identifies any cloud-based services with which the camera communicates.
–
–
6.2

Accounts

Four separate accounts can be defined for posting and recording export.
Type
Select either FTP or Dropbox for the account type.
Before using a Dropbox account ensure that the time settings of the device have been
correctly synchronized.
Account name
Enter an account name to be shown as the target name.
Note: The fields that appear next depend on the option that you select in the field Type.
IP address
Enter the IP address of the server on which you wish to save the JPEG images.
Login
Enter the login ID for the server.
Password
Enter the password that gives you access to the server. To verify the password, click the
Check button to the right.
Path
Enter the exact path on which you wish to post the images on the server. To browse for the
correct path, click the Browse button to the right.
Maximum bit rate
Enter the maximum bit rate for the JPEG images (in kbps).
Encryption
Tick the box to use a secure FTP over TLS connection.
6.3

DynDNS

Bosch Security Systems
Select On to poll the server constantly.
Select Off to block polling.
If you have registered the device on a cloud-based service such as Bosch Remote Portal,
then this field identifies this fact ("Connected").
Note: The button () to connect to the device with that service is active.
If you have not registered the device, then the message, "Not available. When
'Operation' is set to 'Auto', 'Automatic IP assignment (DHCP)' must be active to
connect to the Bosch Remote Portal" appears.
Note: The button () to connect to the device with that service is not active.
User Manual
Connectivity | en 25
2020-11 | draft 0.9 |