Operational Instructions - Basta Boatlifts 2x2k50 Manual

OPERATIONAL INSTRUCTIONS

IMPORTANT:
• If you purchase a new vessel, make sure does not exceed the weight capacity limits of the lift.
Maximum weight capacity can be found on the cover of this manual and on the H frame of the lift.
• Always turn power unit OFF when not in use.
• Keep inside of power unit box dry.
• To prevent unauthorized use lock box using padlock through the latch hasp.
• Securing your mooring line to the dock may provide additional security should the lift be lowered
inadvertently.
• Leaving your bilge pump on the automatic setting may prevent the accumulation of rainwater in
your vessel and overloading of the lift.
• Service your lift according to recommended Maintenance (page 19).
• Only use Basta Boatlifts approved fluid in lift. Contact Basta Boatlifts or authorized dealer for
approved biodegradable hydraulic fluid.
• When not in use, store the lift in the upright position to prevent it from being an unknown hazard
underwater.
• Store with the power off.
Step 1:
Power on. Using the manual switch on the control panel, switch the On/Off switch to the
"On" position.
Step 2:
Lower the Lift. Using the Key Fob, unlock the Fob by pressing and releasing the lock button.
Next, press the down button to lower the lift.
Step 3:
Carefully guide the watercraft off the lift. Repeat in reverse order upon return.
For more questions or troubleshooting, consult your Authorized Dealer, the FAQs page on
Bastaboatlifts.com or give us a call at 425-641-8911.
PAGE 18