Basta Boatlifts 2x2k50 Manual page 16

IMPORTANT:
The leveling process must be completed to ensure stability of the lift frame
and Over-Center safety lock.
Level the lift following these instructions while referencing image below:
16
Step 1: Use a tape measure (reference image on right) to determine that the lower
Step 2: If the lower frame needs to be raised start with the lowest corner first then
Step 3: To make adjustments, first make sure the lift is properly supported.
FORWARD
FWD
CROSS-
MEMBER
Leveling requires a second person to support the crossmember while making adjustments.
If the lift is too heavy for two people, a ratchet strap or winch system will be required to
raise/lower the frame corners.
PAGE 16
frame is level.
work your way around the lift in a circle, corner to corner. Adjust the lift legs as needed.
Then, loosen the anti-sway bolts, remove the P-pin and raise or lower
the lift crossmember on the leg. Level the lift one corner at a time,
while making sure not to have more than 5" of difference in height
between the corners to prevent binding.
Surface of Water
MUST BE LEVEL
Contact Basta at 866-GO-BASTA for additional help.
NOT LEVEL
LEVEL
AFT
12"
+
4.5"
AFT
CROSS-
MEMBER