Download Print this page

Basta Boatlifts Over-Center 4.5k37 Manual

Hydraulic aluminum lift
Hide thumbs Also See for Over-Center 4.5k37:

Advertisement

Quick Links

Over-Center
4,500 lbs Capacity
READ complete manual CAREFULLY
BEFORE attempting assembly or operation
1-866-GO BASTA
www.gobasta.com
Basta, Inc.
Bellevue, WA 98005 USA
TM
Hydraulic Aluminum Lift
Models 4.5k
& 4.5k
37
53
ASSEMBLY
INSTALLATION
REPLACEMENT PARTS
©
Copyright 2018 Basta, Inc.
11/21
L392-0098D

Advertisement

loading
Need help?

Need help?

Do you have a question about the Over-Center 4.5k37 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Basta Boatlifts Over-Center 4.5k37

  • Page 1 Over-Center Hydraulic Aluminum Lift 4,500 lbs Capacity Models 4.5k & 4.5k READ complete manual CAREFULLY ASSEMBLY INSTALLATION BEFORE attempting assembly or operation REPLACEMENT PARTS 1-866-GO BASTA www.gobasta.com 11/21 © Basta, Inc. Bellevue, WA 98005 USA Copyright 2018 Basta, Inc. L392-0098D...
  • Page 2: Table Of Contents

    The lift should not be used for any other Use a mooring line for additional security. purpose besides the lifting of boats & watercraft. MAXIMUM CAPACITY Only use Basta Boatlifts biodegradable non-toxic 4,500 lb hydraulic fluid - part # Y354-0001. 2,000 kg...
  • Page 3 OIL INJECTED INTO THE SKIN FROM HIGH PRESSURE LEAKS IN HYDRAULIC SYSTEMS CAN CAUSE SEVERE INJURY. SEEK MEDICAL ATTENTION IMMEDIATELY. USE ONLY BASTA BOATLIFTS BIODEGRADABLE HYDRAULIC FLUID After the lift is assembled and installed, all fasteners should be checked for proper tightness and reinspected periodically.
  • Page 4 13&14 13&14 13&14 13&14 6&2 1&2 1&2 6&2 6&2 6&2 6&2 1&2 1&2 1&2 1&2 6&2 1&2 6&2 1&2 6&2 1&2 6&2 1&2 6&2...
  • Page 5 MECHANISM PARTS LIST SEE PAGES 13 &14 FOR ELECTRICAL AND HYDRAULIC PARTS ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. K200-0001 W102-0046 Extension Arm [4.5k only] Foot Pad Bunk Rail Assembly, Left W117-0001 A427-0017 A427-0018 Bunk Rail Assembly, Right W105-0010 Side Rail W111-0016...
  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS NOTE: use a small amount of 'moly' lube on bolt threads NOTE: assemble lift on level ground and adjust legs so that lift base frame is level during lift assembly. NOTE: the 3 different holes shown can be used for pin “9” to allow fine height adjustment after installation DOWN...
  • Page 7 Assemble lift on level ground and adjust legs so that lift base frame is level during lift assembly. Assemble lift on level ground and adjust legs so that lift base frame is level during lift assembly.
  • Page 8 ASSEMBLY INSTRUCTIONS NOTE: use a small amount of 'moly' lube on bolt threads NOTE: orient flat faces of toward lift center Assemble lift on level ground and adjust legs so that lift base frame is level during lift assembly.
  • Page 9 NOTE: forward H-frame BOTH is shown. Aft H-frame H-FRAMES installation is the same are installed with curved side up NOTE: no washer on this end NOTE: no washer on this end NOTE: no washer on this end Assemble lift on level ground and adjust legs so that lift base frame is level during lift assembly.
  • Page 10 ASSEMBLY INSTRUCTIONS NOTE: use a small amount of 'moly' lube on bolt threads Install cylinder with lift in 'down' position washers here NOTE: install plastic washers here NOTE: install cylinder with hose fittings facing dock.
  • Page 11 ASSEMBLY INSTRUCTIONS NOTE: use a small amount of 'moly' lube on bolt threads Model 4.5k only 13+14 Model 4.5k only...
  • Page 12 ASSEMBLY INSTRUCTIONS NOTE: use a small amount of 'moly' lube on bolt threads The angles and directions of bunk rail assemblies MUST face the directions shown below. LONG SHORT AT AFT FORWARD Inside Inside bushings are bushings are pre-installed pre-installed Left Rail Right Rail Bolts that hold the pins will be installed in...
  • Page 13: Parts List And Diagrams

    CONNECT POWER UNIT FEMALE QUICK COUPLER DO NOT SUBMERSE H700-0019 COMPLETE POWER PACKAGE Keep inside dry H653-0001 Prevent unauthorized use - KEEP BOX LOCKED up/down switch power NOTE: NOTE: switch REMOVE SHIPPING PLUG IN REMOVE SHIPPING PLUG IN solar RESERVOIR AND REPLACE RESERVOIR AND REPLACE controller WITH BREATHER PLUG...
  • Page 14 POWER SYSTEM COMPONENTS SOLAR PANEL ASSEMBLY R281-0004 Padlock not included ENCLOSURE C243-0003 CONTROL PANEL ASSEMBLY R815-0008 pre-wired with wiring harness POWER UNIT ASSEMBLY Please order replacement parts by PART NO. and DESCRIPTION H603-0003 Solar Controller # R283-0002 Hydraulic Cylinder Assembly #H310-0009 Connect to Solar Panel (Item GG on pg 5)
  • Page 15 ASSEMBLY INSTRUCTIONS NOTE: use a small amount of 'moly' lube on bolt threads raise lift to install 1/4 x 1.75” bolts ("13") 13+14 13+14 13+14 13+14 Assemble lift on level ground and adjust legs so that lift base frame is level during lift assembly.
  • Page 16 The battery electrolyte in a flooded cell type battery should be slightly above the indicator ring in each cell. Carefully add DISTILLED water if necessary. Do not over-fill. AGM type batteries are sealed and do not require maintenance. USE ONLY BASTA BOATLIFTS BIODEGRADABLE HYDRAULIC FLUID hydraulic fluid level with inch...
  • Page 17: First Use / Adjustments

    FIRST USE AND ADJUSTMENTS First test lift on dry ground for oil leaks, remote control function and correct operation. IMPORTANT: After installation, the legs MUST be adjusted so that the lift frame is level. Lift must move into Over-Center position when fully raised. H-frame arms should appear to be tilted slightly forward.
  • Page 18 Use these diagrams to help place the lift 4.5k 111” 36” 110” 120” 12” 58” 36” 22” 21”...
  • Page 19 Use these diagrams to help place the lift 4.5k 111” 36” 110” 120” 12” 77” 54” 25” 24”...
  • Page 20: Troubleshooting / Faq

    Always leave the boat in the fully raised, Over-Center™ for the environment. This fluid is different than food-grade oil. Only use Basta Boatlifts fluid in your hydraulic system. position with the power off. Q: WHAT IF I GET A NEW BOAT? A new lift Re-leveling the boat lift may be necessary.
  • Page 21: Maintenance

    The hydraulic fluid level should be about one inch below the top of the reservoir with the lift DOWN. DO NOT add fluid with the lift in the raised position! Use only Basta Boatlifts biodegradable hydraulic fluid. DATE: WHAT WAS DONE:...
  • Page 22: Warranty

    Products. on the water. Welcome to the Basta Boatlifts family and Boat Happy! Labor for warranty work to be provided by the Company’s Authorized dealer for a period of 3 years from Warranty Start Date, provided there is an active Authorized Basta Inc.
  • Page 23: Basta Boatlifts Accessories

    ACCESSORIES FOR MOST BASTA BOATLIFTS For additional information and images visit our web site at www.gobasta.com or contact Basta Boatlifts at 1-866-GO BASTA for a catalog. Centering Guides Power Unit Support Bracket These vertical reference guides Safely secure the power unit box...
  • Page 24 Basta, Inc. Bellevue WA 98005 USA...

This manual is also suitable for:

Over-center 4.5k53