Activate Licensed Functions; Configuring Eebus Devices - SMA DATA MANAGER M Operating Manual

SMA Solar Technology AG
4. To configure the digital outputs of a connected device, select the button
5. Fill out the entry fields and select [Save].
8.9

Activate licensed functions

The product is equipped with basic functions and specific features. The features can be extended
with licensed functions. The licensed functions are activated in the product's user interface.
Requirements:
☐ The required licensed function is included in the product or has been purchased in the SMA
online store under www.SMA-Onlineshop.com.
☐ The activation code received by e-mail is available.
Procedure:
1. Purchase licensed function in SMA online store under www.SMA-Onlineshop.com.
☑ After a few minutes, you will receive a confirmation e-mail and an e-mail with an
activation code. If you have not received an e-mail, check whether the e-mails have been
redirected to a folder for junk mail or whether an incorrect e-mail address has been
entered.
2. Log into the user interface of the Data Manager.
3. Select the Licensed functions menu item in the Configuration menu.
4. Select the [Activate] button.
5. Enter the activation code and confirm with
[Activate].
☑ The licensed function is activated and can be used.

8.10 Configuring EEBUS Devices

The EEBUS communication standard enables automatic data exchange for efficient use of energy.
You can add devices to the system that feature the EEBUS communication standard (currently only
Audi e-tron charging system connect). Only 1 EEBUS device can be connected to the product. No
further charging stations (e.g. via Modbus) can be operated at the same time.
Requirement:
☐ The EEBUS devices must be in operation and connected to the local network.
☐ The licensed function must be purchased and activated.
Operating manual
8 Operation
.
EDMM-10-BE-en-27 53