Advertisement
Safety information
Follow normal safety precautions for all office equipment:
•
Use only Pitney Bowes approved supplies, in particular aerosol dusters.
Improper storage and use of aerosol dusters or flammable aerosol dusters
can cause an explosive-like condition that could result in personal injury
and/or property damage. Never use aerosol dusters labelled flammable and
always read instructions and safety precautions on the duster label.
•
This printer is powered by an external AC power adapter. Use only the AC
power adapter and AC power cord supplied with the printer and plug it into
a properly grounded wall outlet that's located near the printer and easily
accessible. Failure to properly ground the power adapter can result in severe
personal injury and/or fire.
•
The power cord wall plug is the primary means of disconnecting the power
adapter from the AC supply. The power adapter is on whenever it is plugged
into a live receptacle.
•
To obtain supplies, please contact our Supply Line
•
Material Safety Data Sheets can be obtained through the web or from our
Supply Line
™
•
Avoid touching moving parts or materials while the machine is in use. Keep
hands, loose clothing, jewellery and long hair away from all moving parts.
•
Do not remove covers or defeat safety interlock switches. Covers enclose
hazardous parts that should only be accessed by properly trained service
personnel. Immediately report to service any damaged or non-functioning
components that renders the unit unsafe.
•
Place the unit in an accessible location to allow for proper venting of the
equipment and to facilitate servicing.
•
The power cord wall plug is the primary means of disconnecting the machine
from the AC supply.
•
Do not use an adapter plug on the line cord or wall outlet.
•
Do not remove the ground pin from the line cord.
•
Place the printer so the AC power adapter is close to an easily accessible wall out
let. DO NOT use a wall outlet controlled by a wall switch or one that is shared with
other equipment.
•
DO NOT route the power cord over sharp edges or trap it between pieces of
furniture. Make sure there is no strain on the power cord.
•
DO NOT route the DC power cable that plugs into the printer over sharp edges
or trap it between pieces of furniture. Make sure there is no strain on the DC
power cable.
•
Make sure the area in front of the wall outlet into which the AC adapter is
plugged is free from obstruction.
•
Before clearing a stoppage, be sure machine mechanisms come to a stop.
•
When removing stalled material, avoid using too much force to protect against
minor personal injury and damaging equipment.
•
To prevent overheating, do not cover any vent openings.
•
Operation of this equipment without periodic maintenance will inhibit
optimum operating performance and could cause the equipment to
malfunction. Contact your machine supplier for required service schedule.
•
Read all instructions before attempting to operate the equipment.
•
Use this equipment only for its intended purpose.
Scale Safety
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
Shielded I/O cables must used with this equipment to ensure compliance with the
limits. Use of unshielded cables is prohibited.
Precautions
CAUTION: This equipment is intended to be used with limited power circuits with
SELV and Non-hazardous energy outputs.
• The scale is not legal for trade
• Do not exceed the scale's maximum weight limit
• Do not place lighted candles, cigarettes, cigars, etc., on the scale.
• Use the equipment only for its intended purpose.
• Use only 9-volt Alkaline battery if needed
• Remove battery if scale is not going to be used for long periods of time or if the
scale is powered through the USB cable.
• Dispose of old batteries properly.
•
Always follow the specific occupational safety and health standards for your
workplace.
•
Use only Pitney Bowes approved direct thermal label media.
*SDC2130A*
Form no: SDC2130A (10-17)
© 2017 Pitney Bowes Ltd.
. Refer to the Contact Information List for more information.
to place orders
™
Pitney Bowes Limited
Building 5, Trident Place
Mosquito Way, Hatfield AL10 9UJ
T: 08444 992 992
F: 08702 415 249
Advertisement
