Western Digital OpenFlex Data24 Installation Manual page 18

Installation Guide
Figure 11: Install Front Rack Mount
Step 2 : Install the chassis into the rack rails using a two person lift approach or lift equipment.
a. Perform a two person lift or follow the appropriate lift instructions of the usage instructions
and safety guidelines of your lift equipment to safely install the enclosure into the rack rails.
b. Using the T15 Torx screwdriver, tighten the two Torx captive screws, located under the rack
ear cutouts, to secure the Chassis to the rail. Repeat this step to secure the remaining rack
mount to the remaining rail.
1. Installation
1.5 Installation Procedure
13