Huawei UPS5000-E User Manual page 87

UPS5000-E-(400 kVA-600 kVA)
User Manual (60 kVA Power Modules)
● Do not install the 4G module in an enclosed environment or a position subject
● The figure uses top cable routing as an example. The installation positions are
Figure 3-15 Installing a 4G module
----End
FE Access Scenario
Step 1 Connect the network port on a LAN switch or router to the FE port on the
monitoring interface card.
Issue 09 (2023-07-10)
NO TICE
to severe signal interference. Otherwise, the 4G module may be disconnected
from the network for a short period of time.
the same for bottom cable routing and top air-flow configuration.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
79