Back Panel - RCA VRM420 User Manual

Other Information
ANT. IN
AUDIO
RF OUT
OUT IN
CH.
3 4
VIDEO

Back Panel

ANT. IN jack Receives a signal from an antenna or cable system when the VCR is
attached with RF cables.
AUDIO and VIDEO IN jacks Receives signals from another component (such as
another VCR or camcorder) when connected to these jacks. Use the INPUT button on the
VCR or remote control to select the rear video line input A/V jacks (L1) to record from
these jacks.
AUDIO and VIDEO OUT jacks Sends signals from the VCR to another component (like
a TV or another VCR) when the other component is connected to these jacks.
CH. 3/4 switch Determines the channel to which the TV must be tuned in order to see
the VCR's picture. Not used when connecting the VCR to the TV using A/V cables.
RF OUT jack Passes the VCR's signal to a TV using the supplied RF cable.
46 Chapter 5