Tv + Vcr + Satellite Receiver - RCA VRM420 User Manual

Chapter 1
TV
VCR
SATELLITE
RECEIVER
VIDEO

TV + VCR + Satellite Receiver

Note: Your television and/or satellite receiver back panels may not look
exactly like the models shown here.
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on
the back of the VCR and the other end to the TV's antenna input jack.
2. Connect satellite receiver to the VCR
Connect one end of another RF coaxial cable (not included) to the
antenna output jack on the satellite receiver and the other end to the ANT.
IN jack on the VCR.
3. Connect the antenna to your satellite receiver
If necessary, connect an antenna or cable line feed (not included) to the
antenna input jack on the satellite receiver.
4. Connect the satellite feed to the satellite receiver
Connect the satellite receiver's RF coaxial cable feed (not included) to the
satellite input jack on the satellite receiver.
Connections & Setup
AUDIO
VIDEO
L / MONO
R
IN
L
OUT
S-VIDEO
AUDIO
OUT IN
CH
3
VIDEO
2
IN FROM ANT
OUT
OUT TO TV
SATELLITE
R L
S-VIDEO
3
From Cable
or TV Antenna
CABLE/
ANTENNA
1
ANT. IN
RF OUT
4
CH3
CH4
IN
4
From
Satellite
Go To Page 11
9