Using On-Screen Menus
SET DAYLIGHT SAVING
Does your area observe
Daylight Saving Time
from April to October?
1 Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
Displaying Time and Date
Pressing the INFO button on the
remote control or VCR displays the
time and date on screen
temporarily.
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
0 Exit
The PREFERENCES menu
allows changes to be made
to a variety of different VCR
features.
20
Setting Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU.
2. Press 2 to choose TIME.
3. Press 4 to choose SET DAYLIGHT SAVING.
4. Select the appropriate option.
Notes: DST stands for Daylight–Saving Time.
If you choose Automatic for the time zone, the VCR sets the clock using
any DST information broadcast in the channel's signal.
Setting Time and Date Manually
If Auto Clock Set was unsuccessful, set the time and date manually in the
TIME menu. The Auto Clock Set feature is automatically turned off when
time and date information is set manually.
1. Press MENU to display the VCR MAIN MENU.
2. Press 2 to choose TIME.
3. Press 1 to choose SET TIME AND DATE.
4. Enter the data using the number buttons. Press 0 before single-digit
numbers and follow the on-screen directions to exit the menus.
Additional Set Up Features in the
ON
Preferences Menu
ON
2:00
AUTO
Note: The features described on the following pages are all accessed
SLP
through the PREFERENCES menu.
To Access the PREFERENCES menu:
1. Press MENU to display the VCR MAIN MENU.
2. Press 5 to select PREFERENCES.
You are now ready to select an item from the PREFERENCES menu to set up.
Chapter 2