Front Panel; Back Panel - RCA VRS420 User Manual

FRONT PANEL
li
/ tl
/
Remote Sensor
CHANNEL-TRACKING Up or Down Selects next higher or lower channel in the VCR's channel memory.
Adjusts tracking when a tape is playing.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow
motion during play-pause.
PLAY,PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to prevent recording
of unwanted scenes.
POWER Turns the VCR on or off.
RECORD Starts VCR recording. Used for express recording.
Remote Sensor Receives signals from the remote control. Aim the remote at this sensor.
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during playback. Starts slow
motion during play-pause.
STOP-EJECT Stops the normal functions such as record, playback, rewind, fast-forward or pause. Ejects the
tape when the VCR is stopped.
BACK PANEL
ANT.IN
VIDEO AUDIO
3 CH. 4 Switch Selects the channel to which you will tune the TV to see the VCR picture if you connect the
VCR using the ANT.IN and RF OUT jacks.
ANT. IN Jack Receives a signal from an antenna or cable system when attached.
AUDIO and VIDEO IN Jacks Receives signals from another component, like a VCR or camcorder, when it is
connected to these jacks. Use INPUT on the remote to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to another component, like a TV or VCR, when it is
connected to these jacks.
RF OUT Jack Passessignal to TV using the cable supplied.
48