Table of Contents
Advertisement
BACK PANEL
IN
(FROM ANT)
AUDIO
CH
1_
L '2J
3 CH. 4 Switch
Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using one of
the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another
component,
like a VCR or camcorder, when it is connected
to
these jacks. Use INPUT on the remote to select "L" to record from
these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another
component,
like a TV or VCR, when it is connected
to
these jacks.
ANT IN Jack Receives a signal from an antenna or cable system
when attached.
RF OUT Jack Passessignal to l_/usingthe cablesupplied.
58
Advertisement
Table of Contents
