Table of Contents
Advertisement
VCR Features
Recording Features
Your VCR provides many ways to capture programming:
1. Recording lets you press one button to record a program.
2. Express Recording (XPR) allows recording to start while a program is being watched.
This feature automatically stops recording after a designated period of time.
3. Timer Recording program the VCR for a daily, weekly, or one-time recording which will
automatically start and stop at the times you set.
Express Recording (XPR)
Use XPR to quickly record the remaining portion of a program being watched. XPR is a
great way to capture the end of a sporting event that has run into overtime or a live
broadcast that runs long.
XPR works in 30-minute increments. You can capture the last 30, 60, 90, etc. minutes of
programming (depending on tape length), up to four hours total.
To Activate XPR:
Rec
Ch 36
Record Length 0:00
Rec
Ch 36
Record Length 1:30
Press REC to set length
Press REC to set length
32
1. If necessary, turn on the VCR and tune it to the channel with the desired
programming.
2. If necessary, insert a tape with its safety tab in place into the VCR. Make
sure it is cued to record at the proper starting point.
Note: To override the preferred tape speed setting, press the SPEED
button on the remote control repeatedly to toggle between SP and SLP
choices.
3. Press the RECORD button on the remote control or VCR front panel to start
recording.
4. Repeatedly press the RECORD button to set up the recording duration.
•
Each press of the RECORD button adds 30 minutes of recording time.
•
The VCR automatically turns off after recording for the set time.
•
To stop an XPR recording, press and hold the STOP button on the
remote control or VCR front panel for several seconds until STOP
appears on the VCR on-screen display.
Chapter 4
Advertisement
Table of Contents
