Table of Contents
Advertisement
Other
Information
ANT. IN
RFOUT
Back Panel
CH. 3/4 switch
Determines
the channel to which the TV must be tuned in order to see the
VCR's picture. Not used when connecting
the VCR to the TV using A/V cables.
AUDIO (LEFT and RIGHT) and VIDEO IN jacks
Receives signals from another component,
such as another VCR or camcorder,
when connected
to these jacks. Use the INPUT button on the
VCR or remote control to select the rear video line input A/V jacks (L1) to record from these }acks.
AUDIO (Right and Left) and VIDEO OUT jacks
Sends signals from the VCR to another
component,
like a TV or another VCR, when the other component
is connected
to these iacks.
ANT. IN jack
Receives a signal from an antenna or cable system when the VCR is attached with
RF cables.
RF OUT jack
Passes the VCR's signal to a TV using the supplied
RF cable.
Chapter 5
47
Advertisement
Table of Contents
