Table of Contents
Advertisement
Connections & Setup
Using the Remote Control to
Navigate On-Screen Menus
The technical term is "Navigation" – how you move through the on-screen menus. The
theory is the same for all the menu screens; use the corresponding number button on the
remote control select it.
To choose an on-screen item, press the remote control's corresponding number button.
Note: Selecting a menu item can take you to another menu, activate a choice, or activate a
data entry field (such as the hour field in the Set Time menu).
Select a language.
Seleccione un idioma.
Choisissez une langue.
1 English
2 Español
3 Français
VCR MAIN MENU
1 Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Language
0 Exit
All of the VCR's menus are
accessed through the Main
Menu. Press the remote
control's MENU button to
start.
12
Complete the QuickSet Guide
The menu system in your VCR allows you to customize your preferences
as well as use all the VCR's features. To help you use the VCR as quickly
as possible, there is an initial QuickSet Guide that walks you through
several important setup steps at one time.
The first time you turn on the VCR, you will be able to set up available
channels, time and date information, and more. The first menu you will
see asks which language you prefer to have the on-screen menus appear
in.
The remaining menus throughout the setup will appear in the language
chosen. Just follow the step-by-step procedures until the QuickSet Guide
is complete.
Note: If you get a prompt saying The Auto Clock Set was unsuccessful.
Would you like to set the time and date? then time information may not be
available in your area. Follow the on-screen instructions to set up the time
and date manually which will automatically turn off the Auto Clock Set.
Accessing Menus
The series of preferences that are set in the QuickSet Guide can also be
handled individually using the VCR's on-screen menu system. There are
other settings not covered in the initial setup that are also handled using
the on-screen menus.
For example, if you decide to run the QuickSet Guide again, you can
access the Setup menu by pressing the remote control's MENU button.
Once the Main Menu is displayed, press the 4 button to choose Setup.
From there, you can start the QuickSet Guide from the beginning.
All on-screen menus are accessed the same way, starting in the Main
Menu which is displayed by pressing the remote control's MENU button.
Note: See chapter two, Using On-Screen Menus, for details about
changing the VCR's individual settings.
Chapter 1
Advertisement
Table of Contents
