Time Counter - RCA VRM420 User Manual

Hours
0:30:00
Chapter 4

Time Counter

Minutes
The time counter shows the actual time used when recording or playing
back a tape. The time counter helps locate the beginning or end of
Seconds
recorded events. It resets to 0:00:00 whenever a tape is ejected from
the VCR.
For example, if you record a 30–minute program at the beginning of a
tape, rewind it, and then want to go to the end of the first program to
start another recording:
1. Press the INFO button twice to display only the time counter.
2. Press the CLEAR button to reset the time counter to 0:00:00.
3. Press the remote control's FORWARD button (FWD on the VCR) to advance
a tape until the time counter reads 0:30:00.
4. Press the STOP button. This is the approximate end of a 30-minute program
(you may want to press the PLAY button to verify). When the tape is cued
correctly, you can begin recording.
5. Press the INFO button to remove the time counter from the screen and
return to the normal display mode.
VCR Features
37