5000-023B & 5000-024B; 5000-023B - Yetter 5000-023B Operator's Manual

Corn stalk roller

5000-023B & 5000-024B ASSEMBLY INSTRUCTION

GLEANER 3000 / HUGGER 630 & 830 / MF 3000 / CHALLENER CH630 & CH 830

STEP 1. Attach the 5000-248 Extension Mount to the 5000-247 Plate using 5/8" X 2" Bolts & 5/8" Lock Hex Nuts.

STEP 2. Install the Mount Assembly to the Corn Head Frame using 5/8" X 8" Bolts, Clamp Plates, 5/8" Washers,

& 5/8" Lock Hex Nuts.

NOTE:

Do not fully tighten hardware until the pivot arms are installed during Step 6.

5000-023B 6 ROW MOUNTING LOCATIONS

5000-024B 8 ROW MOUNTING LOCATIONS

Table of Contents

5000 series 5000-024b 5000-035a