Advertisement
5000-035A ASSEMBLY INSTRUCTION
STEP 3: Attach 1) 5000-135 Arm Mount on each Offset Mount using ½" X 1 ¾" Bolts, ½" Washers, & ½" Lock Hex
Nuts. Attach 2 Arm Mounts to the Double Offset on rows 4 & 5.
STEP 4: Install a 5000-323 Lock Up Pin in the storage location on the Mount Arms & secure with Hair Pin Clips.
STEP 5: Attach the 5000-256 & 5000-259 Overbearing Arms to the Mount Brackets using 5/8" X 3" Bolts, Pivot
Bushings, & 5/8" Lock Hex Nuts Nuts using the upper hole on the arms. Fully tighten all hardware at
this time. Use the diagram on page 9 to determine where each LH & RH arm are installed.
10
Advertisement
