5000-023C & 5000-024C - Yetter 5000-023C Operator's Manual

5000-023C & 5000-024C ASSEMBLY INSTRUCTION
GLEANER 3000 / HUGGER 630 & 830 / MF 3000 / CHALLENER CH630 & CH 830
STEP 1. Attach the 5000-248 Extension Mount to the 5000-247 Plate using 5/8" X 2" Bolts & 5/8" Lock Hex Nuts.
STEP 2. Install Mount Assembly to Corn Head Frame using 5/8" X 8" Bolts, Clamp Plates, 5/8" Washers, & 5/8"
Lock Hex Nuts. When mounting the assembly to head frame, the extension mount will angle downward.
NOTE: Do not fully tighten hardware until the pivot arms are installed during Step 6.
5000-023C 6 ROW MOUNTING LOCATIONS
5000-024C 8 ROW MOUNTING LOCATIONS
6