3. Setting Menu:
Press "MENU" switch through setup menu.
Options
Set DMX Address
Fountain Height
Manual Fountain
Manual Fountain
4. DMX address setup for SPARKULAR:
Sparkular No.
1
DMX Address
1
Note: DMX address must set according to above rules.
If use together with HOST CONTROLLER ZK6200/6300, each unit of SPARKULAR must use
different DMX address, otherwise it may leads to signal interference.
5. Advanced Interface
Options
Set Temperature
Wireless Control
LCD Backlight
Density@ Height 1
Density@ Height 2
Density@ Height 3
Density@ Height 4
Density@ Height 5
Density@ Height 6
Density@ Height 7
Density@ Height 8
Density@ Height 9
Density@ Height 10
Mode Selection
Default Parameter
Range
1-512
1-10
machine. If it is ON, machine will heating up
ON/OFF
ON/OFF
2
3
4
5
6
7
3
5
7
9 11 13 15 17 19 21 23 25 27 29 31 33 35
Range
500-610
ON/OFF
ON/OFF
30-50
Adjusts the sparks density of Height gear 1*
30-50
Adjusts the sparks density of Height gear 2*
30-50
Adjusts the sparks density of Height gear 3*
30-60
Adjusts the sparks density of Height gear 4*
30-70
Adjusts the sparks density of Height gear 5*
40-100
Adjusts the sparks density of Height gear 6*
40-100
Adjusts the sparks density of Height gear 7*
40-100
Adjusts the sparks density of Height gear 8*
40-100
Adjusts the sparks density of Height gear 9*
40-100
Adjusts the sparks density of Height gear 10*
Factory Mode
User Mode
Explanation
Set DMX Address.
10 gears of fountain height, manually
adjust the height of sparks.
Auto preheat function switch after turn on
automatically after turn on. If it is OFF,
operator need to start heating up on HOST
CONTROLLER or DMX console.
Automatic clear material settings
8
9 10 11 12 13 14 15 16 17 18
Explanation
Setup SPARKULAR inner core temperature
Wireless ON/OFF, for wireless version only
LCD Backlight ON/OFF
Factory mode is for engineer only. When in
Factory mode machine can't controlled by
DMX console/host controller
Press ENTER in this interface, all parameter
of machine restore to default value.
Need help?
Do you have a question about the SPARKULAR and is the answer not in the manual?