Environmental Modules And Solid State (Pins) Detector Assembly - TA Instruments DISCOVERY XENON FLASH Getting Started Manual

Environmental Modules and Solid State (Pins) Detector Assembly

The Environmental Module includes a cooling block with heater cartridge-resistance furnace, providing
temperature control of the sample operation in air or inert gas. The EM also includes a two-sample holder,
supporting a variety of sample sizes. Adapters are available for smaller cylindrical and/or square samples.
The module includes a Solid State (Pins) Detector.
Figure 3 EM and Solid State (Pins) Detector Assembly.
DXF-200 Getting Started Guide
Locking Arm
Solid State (Pins)
Detector Assembly
Purge Gas Adjusting
Valve
LN2 Outlet
LN2 Inlet
EM
Page 14