Clearing And Acknowledging - ABB RELION REC615 Operation Manual

Section 4
Using the HMI
4.2.9
68
Committing values takes a few seconds.
If the values are not committed, they are not taken into use and they are
lost after a reboot.

Clearing and acknowledging

All messages and indications, including LEDs and latched outputs as well as registers
and recordings, can be reset, acknowledged or cleared using the Clear menu.
1. Click Clear in the left navigation bar.
GUID-2D5FA62E-868C-4030-AD6D-3A666AC95E69 V2 EN
Figure 47: Selecting clear menu
2. In the New Value list, select Clear to choose the item to be cleared.
3. Click Write to IED.
1MRS758754 B
REC615 and RER615
Operation Manual