Changing The Default View; Viewing Single-Line Diagram - ABB RELION REC615 Operation Manual

Section 4
Using the HMI
4.1.11.3
4.1.12
50
•
To scroll the view upwards, press
•
To scroll the view downwards, press
•
To jump from the last row to the first row, press
•
Press to jump from the first row to the last row.
•
To scroll parameter names and values that do not fit the screen, press
once to return to the beginning.

Changing the default view

The default view of the display is Measurements unless set otherwise.
1.
Select Main menu/Configuration/HMI/Default view and press
2.
Change the default view with
3.
Press to confirm the selection.

Viewing single-line diagram

The single-line diagram is created with PCM600. The single-line diagram is active
only when the large screen is used.
•
Select Main menu/Control/SLD to view the single-line diagram or press
navigate between main menu, measurement and single-line diagram.
GUID-1F3D36EE-0930-4E3E-A40B-89389E6EA903 V1 EN
Figure 24: Single-line diagram with one switch and IEC symbols
.
.
again.
or .
1MRS758754 B
. Press
.
to
REC615 and RER615
Operation Manual